POWER CLEAN XL-77 / SP

A special-purpose aqueous cleaner/degreaser with low foaming and additional corrosion protection. Parts leave the wash clean and protected — extended rust prevention without a separate protection stage. Typical applications are clean-and-protect in one stage, inter-operational storage and low-foam spray systems.

POWER CLEAN XL-77 / SP is formulated for Ferrous. If your basket carries a metal not listed, ask us before running a trial — substrate compatibility is tested on your actual parts.

Power Clean aqueous concentrates work between 1% and 5% — that is 1:100 to 5:100 with water. Light maintenance soils sit at the low end; heavy machining oil, buffing compound and carbon need the upper end. The exact figure is set during the trial on your own parts.

55–65 °C for most aqueous grades. That is also where low-foam products stop foaming, because their surfactant clouds out just below the working range. A trichloroethylene vapour degreaser, by comparison, has to be held at 90–100 °C.

POWER CLEAN XL-77 / SP is formulated to prevent long-term rust prevention. Power Clean aqueous concentrates carry an in-built corrosion inhibitor giving roughly 7–15 days of indoor protection after the wash. For stock, transit or export, use a dedicated rust preventive such as PC RP-636, which gives 3–6 months.

20 L, 50 L, 200 L and 1000 L, with custom packing available. Every product ships with a safety data sheet plus dosing and PPE guidance, and production runs to an ISO 9001 certified system with batch-wise quality control. Trials normally start with a single 20 L pail.