POWER CLEAN XL

POWER CLEAN XL is an all-purpose industrial cleaner/degreaser concentrate designed to replace hazardous substances such as trichloroethylene (TCE), perchloroethylene and caustic chemicals. It removes oil, grease, dirt and dust fast — in ultrasonic, spray, immersion or manual cleaning — with the same or better cleanliness and full safety for the worker, the equipment and the surroundings. Typical applications are machined component degreasing, replacing tce and caustic cleaning and ultrasonic and immersion systems.

POWER CLEAN XL is formulated for Multi-metal. If your basket carries a metal not listed, ask us before running a trial — substrate compatibility is tested on your actual parts.

Power Clean aqueous concentrates work between 1% and 5% — that is 1:100 to 5:100 with water. Light maintenance soils sit at the low end; heavy machining oil, buffing compound and carbon need the upper end. The exact figure is set during the trial on your own parts.

55–65 °C for most aqueous grades. That is also where low-foam products stop foaming, because their surfactant clouds out just below the working range. A trichloroethylene vapour degreaser, by comparison, has to be held at 90–100 °C.

POWER CLEAN XL is intended for ultrasonic, spray, soak and manual use. Ultrasonic cleaning reaches blind holes, cross-drillings and thread roots that a spray jet cannot see, and it needs a bath that has been degassed after every fresh fill.

20 L, 50 L, 200 L and 1000 L, with custom packing available. Every product ships with a safety data sheet plus dosing and PPE guidance, and production runs to an ISO 9001 certified system with batch-wise quality control. Trials normally start with a single 20 L pail.