Power Clean — industrial cleaning chemicals by Roovel Solutions
Oily machined gears and bearing races before industrial degreasing

The Power Clean Catalogue

PRODUCT CATALOGUE

41 products across aqueous cleaning, cooling-water treatment, solvent replacement and rust protection — every one supplied with dosing guidance and an SDS.

Power Clean manufactures 41 industrial cleaning chemicals in Bangalore: water-based degreasers for parts washing, neutral-pH cleaners for aluminium and brass, low-foam grades for spray and ultrasonic machines, cooling tower descalers and biocides, non-chlorinated solvent cleaners used as trichloroethylene replacements, and rust preventives and removers.

Most aqueous grades work between 1% and 5% at 55–65 °C, carry an in-built corrosion inhibitor giving 7–15 days of indoor rust protection, and are supplied in 20 L, 50 L, 200 L and 1000 L packs with dosing guidance and a safety data sheet. Every product below links to its own page with the full specification.

BY CATEGORY

Four Families, One Standard

The whole range on one map — pick a family to open every series and product inside it.

THE POWER CLEAN RANGE41 PRODUCTS · 12 SERIES · 4 FAMILIES
THE RANGE AT A GLANCE

Category → Series → Product

The complete Power Clean range, organised the way our chemists think about it. Open a family, pick a series, and jump straight to any product — every code links to its own page.

ALL PRODUCTS

Browse the Full Range

Filter by family, or tell us your soils and substrates and we will match the grade for you.

TWO WAYS TO COMPARE

Pick by the Parameters

The full range, laid out two ways — as a spec sheet you can compare across, and as a plain list of every code and description.

SPEC SHEET

Selection matrix

Every product on one sheet — metal compatibility, operating temperature, dilution, chemistry, foam, application method and rust protection, side by side. Work left to right, metal first.

Open the selection matrix
PLAIN LIST

Product list — quick view

Name, SKU code and a one-line description for all 41 products, grouped by family and series. The fastest way to find a code you already half-remember.

Open the quick view
WHY POWER CLEAN

Built Into Every Formulation

Biodegradable
Non-Toxic
Non-Corrosive
Non-Flammable
Cost-Effective
Dilutable & Reusable
Alkaline Aqueous-Based
Zero VOC

Power Clean replaces petrol, diesel, kerosene, trichloroethylene, perchloroethylene, naphtha and caustic soda — Roovel Solutions has been replacing TCE and other toxic solvents in Indian plants since 2000.

BROWSE BY APPLICATION

Find the Grade by the Job

Most people arrive knowing the problem rather than the product code. These are the routes in.

By what you are cleaning

By wash process

By problem

By commercial question

CATALOGUE FAQ

Questions About the Range

Forty-one, across four families: water-based cleaners and degreasers, cooling tower descalers and biocides, solvent cleaners including a trichloroethylene replacement, and rust preventives and removers. Every product has its own page with the full specification.
Most aqueous grades work between 1% and 5% — that is 1:100 to 5:100 with water. Light maintenance soils sit at the low end; heavy machining oil, buffing compound and carbon need the upper end. Confirm the figure on your own parts during the trial rather than assuming it.
55–65 °C for most aqueous grades. That is also where low-foam products stop foaming, because their surfactant clouds out just below the working range. For comparison, a trichloroethylene vapour degreaser has to be held at 90–100 °C.
A neutral-pH grade such as POWER CLEAN NF-14. Alkaline cleaners above roughly pH 10 etch aluminium and zinc, leaving a dull surface that blooms into white rust within days. Neutral chemistry is also the right choice for any basket carrying mixed metals.
20 L, 50 L, 200 L and 1000 L, with custom packing available. Trials normally start with a single 20 L pail once the lab has matched a formulation to your part and soil.
Yes. Every product ships with an SDS plus dosing and PPE guidance, and production runs to an ISO 9001 certified system with batch-wise quality control, so the drum is traceable to a quality record.
Power Clean aqueous concentrates carry an in-built inhibitor giving 7–15 days of indoor protection. For stock, transit or export, PC RP-636 is an oil-based rust preventive giving 3–6 months with a 10–15 minute touch-dry.
Yes, by one of two routes. An aqueous line — wash, rinse, dry — at 1–5% and 55–65 °C, which is cheaper to run and far simpler to comply with; or PC-S 342, a high-flash non-chlorinated solvent, where the existing equipment has to be kept.
Chemist holding a beaker of cleaning solution during batch quality control
NOT SURE WHICH GRADE?

Send Us a Sample Part

Our lab tests it against your soils and substrates, then comes back with a matched product, dilution and trial plan.

Prefer to talk? Call +91-9731727868WhatsApp us