POWER CLEAN ALB

POWER CLEAN ALB is a concentrated aluminium brightener with excellent wetting properties, usable in ultrasonic and spray cleaning up to 6 bar. It works especially well with ADC12 aluminium, leaving components clean with a bright shine. Typical applications are aluminium brightening, die-cast finishing and ultrasonic brightening baths.

POWER CLEAN ALB is formulated for ADC12 aluminium. If your basket carries a metal not listed, ask us before running a trial — substrate compatibility is tested on your actual parts.

Power Clean aqueous concentrates work between 1% and 5% — that is 1:100 to 5:100 with water. Light maintenance soils sit at the low end; heavy machining oil, buffing compound and carbon need the upper end. The exact figure is set during the trial on your own parts.

55–65 °C for most aqueous grades. That is also where low-foam products stop foaming, because their surfactant clouds out just below the working range. A trichloroethylene vapour degreaser, by comparison, has to be held at 90–100 °C.

POWER CLEAN ALB is intended for ultrasonic and spray (to 6 bar) use. Ultrasonic cleaning reaches blind holes, cross-drillings and thread roots that a spray jet cannot see, and it needs a bath that has been degassed after every fresh fill.

20 L, 50 L, 200 L and 1000 L, with custom packing available. Every product ships with a safety data sheet plus dosing and PPE guidance, and production runs to an ISO 9001 certified system with batch-wise quality control. Trials normally start with a single 20 L pail.