POWER CLEAN LF-45

POWER CLEAN LF-45 delivers the same low-foam tunnel and spray performance as LF at a milder pH — a heavy-duty, non-emulsifying alkaline cleaner optimised with the TACT cleaning principle for aluminium and aluminium alloys (ADC10, ADC12, AlSi10MnMg and similar), removing cutting oil, coolant residue, light grease, dust and handling soil. Typical applications are aluminium die-cast cleaning, spray and flood washing and automotive and precision parts.

Compatibility is confirmed against your actual components before anything is recommended. As a rule, alkaline grades suit steel and cast iron, while aluminium, zinc, brass and mixed-metal baskets need a neutral-pH grade such as POWER CLEAN NF-14.

Power Clean aqueous concentrates work between 1% and 5% — that is 1:100 to 5:100 with water. Light maintenance soils sit at the low end; heavy machining oil, buffing compound and carbon need the upper end. The exact figure is set during the trial on your own parts.

55–65 °C for most aqueous grades. That is also where low-foam products stop foaming, because their surfactant clouds out just below the working range. A trichloroethylene vapour degreaser, by comparison, has to be held at 90–100 °C.

POWER CLEAN LF-45 is intended for spray / flood washing use. It is a low-foam grade, which is a requirement rather than a preference in spray washers and ultrasonic baths — foam aerates a spray pump and cushions the cavitation that does the cleaning in an ultrasonic tank.

20 L, 50 L, 200 L and 1000 L, with custom packing available. Every product ships with a safety data sheet plus dosing and PPE guidance, and production runs to an ISO 9001 certified system with batch-wise quality control. Trials normally start with a single 20 L pail.