Power Clean — industrial cleaning chemicals by Roovel Solutions
POWER CLEAN NF-14 — water-based cleaners & degreasers from Power Clean

POWER CLEAN NF-14

AQUEOUS

Non-ferrous cleaner for ultrasonic machines — aluminium, brass and copper.

OVERVIEW

About This Product

POWER CLEAN NF-14 is an aqueous concentrated alkaline non-ferrous cleaner/degreaser for ultrasonic cleaning machines. It removes oils, dirt, grease and dust from aluminium, brass, bronze, nickel and copper quickly without harming the metal — no white patches, stains, discolouration or white rust.

TYPICAL APPLICATIONS
Ultrasonic cleaning of soft metals
Aluminium component cleaning
Brass and copper part cleaning
Non-CorrosiveNon-ToxicPrevents White Rust
POWER CLEANNF-14SKU 714

Key Specifications

Full technical data sheet and SDS available on request.

SKU
714
Application
Ultrasonic
Metals
Al · Brass · Bronze · Ni · Cu
Prevents
White rust · Staining
See the full solution page
Request a Sample

Free chemical samples for qualified applications.

PACKAGING & SUPPLY

Choose Your Supply Format

20 L
Pail — trials & low-volume lines
Ideal for first supervised trials and pilot programs
Best for trials
50 L
Drum — small production supply
For single-washer lines and steady low-volume use
Compact supply
200 L
Barrel — standard production supply
Scheduled delivery on supply programs · drum pump compatible
Most common
1000 L
IBC tote — high-volume & multi-washer plants
Direct-dosed via metering pump · custom packing also available
High-volume supply
PRODUCT FAQ

POWER CLEAN NF-14 — Common Questions

POWER CLEAN NF-14 is an aqueous concentrated alkaline non-ferrous cleaner/degreaser for ultrasonic cleaning machines. It removes oils, dirt, grease and dust from aluminium, brass, bronze, nickel and copper quickly without harming the metal — no white patches, stains, discolouration or white rust. Typical applications are ultrasonic cleaning of soft metals, aluminium component cleaning and brass and copper part cleaning.
POWER CLEAN NF-14 is formulated for Al, Brass, Bronze, Ni and Cu. It will not etch, stain or bloom the surface, which is what alkaline chemistry above roughly pH 10 does to aluminium and zinc. If your basket carries a metal not listed, ask us before running a trial — substrate compatibility is tested on your actual parts.
Power Clean aqueous concentrates work between 1% and 5% — that is 1:100 to 5:100 with water. Light maintenance soils sit at the low end; heavy machining oil, buffing compound and carbon need the upper end. The exact figure is set during the trial on your own parts.
55–65 °C for most aqueous grades. That is also where low-foam products stop foaming, because their surfactant clouds out just below the working range. A trichloroethylene vapour degreaser, by comparison, has to be held at 90–100 °C.
POWER CLEAN NF-14 is intended for ultrasonic use. Ultrasonic cleaning reaches blind holes, cross-drillings and thread roots that a spray jet cannot see, and it needs a bath that has been degassed after every fresh fill.
POWER CLEAN NF-14 is formulated to prevent white rust and staining. Power Clean aqueous concentrates carry an in-built corrosion inhibitor giving roughly 7–15 days of indoor protection after the wash. For stock, transit or export, use a dedicated rust preventive such as PC RP-636, which gives 3–6 months.
20 L, 50 L, 200 L and 1000 L, with custom packing available. Every product ships with a safety data sheet plus dosing and PPE guidance, and production runs to an ISO 9001 certified system with batch-wise quality control. Trials normally start with a single 20 L pail.

Technical data sheet & SDS

Every product ships with a safety data sheet and dosing guidance. Ask for the POWER CLEAN NF-14 documents and we will send them across.

Request the TDS

Is POWER CLEAN NF-14 right for your parts?

Tell us the metal, the soil and the wash equipment — we will confirm the grade and the dilution, or point you at a better fit.

SAME FAMILY

Also in Aqueous

View All Products
Blue industrial drums of cleaning chemical concentrate in a warehouse

Trial POWER CLEAN NF-14 on Your Line

Request a free sample and a supervised trial — measured against your current process.

Prefer to talk? Call +91-9731727868WhatsApp us